-
EVO76-G带齿轮的主机 -
EVO42罗德康普主机 -
NK60主机罗德康普 -
EVO9-NK罗德康普主机 -
一体式空压机
主营：
节能空压机 ETC无油转换器 罗德康普EVO/EVO-NK系列主机 罗德康普NK/B系列主机 后处理及空压机耗材 免费技术指导选型
您刚好需要
我刚好专业
......
带控制单元和空气滤清器的进气阀
带聚结筒的储油器和油分离系统
滤油器和油热阀
最小压力止回阀
提供各种选项，如安全阀、油位观察窗、维护指示器
Model 型号 | Recommended motor power min.- max. 建议的最小-最大电机功率 | Max. flow rate at 7 bar 压力7公斤时最大排气量 | Pressure range min. - max. 最小-最大压力范围 | Net Weight 净重 |
kw | m3/min | barg | kg | |
EVO1-NK | 2.2-5.5 | 0.8 | 5-15 | 31 |
EVO2-NK | 4.0-11 | 1.6 | 5-15 | 40 |
EVO3-NK | 7.5-18.5 | 2.8 | 5-15 | 54 |
EVO6-NK | 15.0-37.0 | 5.5 | 5-15 | 99 |
EVO9-NK | 22.0-55.0 | 8.4 | 5-15 | 199 |
Integrated components are集成组件包括
>EVO® oil injected air end with ROLLING PROFILE®
>Intake valve with control unit and air filter带控制单元和空气滤清器的进气阀
>Oil reservoir and oil separation system with coalescing cartridge(s) 带聚结筒的储油器和油分离系统
>Oil filter and oil thermo valve滤油器和油热阀
>Minimum pressure and non return valve最小压力止回阀
>Various options available such as safety valve, oil level sight glass, maintenance indicators
提供各种选项，如安全阀、油位观察窗、维护指示器
Our EVO6®-NK compact unit is an oil-injected screw compressor module that integrate the main parts of a compressor system and provide optimum operation reliability and reduced design costs for your compressor package.
The following components are integrated into each compact unit: EVO® oil-injected air end with ROLLING PROFILE®, intake valve with control unit and air filter, oil reservoir and oil separation system with coalescing cartridge(s), oil filter and oil thermostat valve, minimum pressure valve and non return valve.
Various options are also available, such as safety valve, oil level sight glass and maintenance indicators.
Advantages of our new EVO® technology
New ROLLING PROFILE® – ultimate efficiency with reduced noise
Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE®
Wide operating pressure range from 5 to 15 barg
High manufacturer assembling – "Made in Germany"
Quality assurance – bench test of every air end before leaving our factory
Easy application selection with our new ROTORCOMP® SIZING AIR Software
Highest flexibility for your package design
Suitable for all types of motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
Ultimate efficiency and reduced noise through
High volumetric output due to
Reduced internal leakage
Thermally optimized oil injection system
Improved suction port efficiency giving reduced internal losses
Low power consumption due to
Optimized torque characteristics and reduced internal friction
Improved outlet port with lower pressure losses
Reduced noise and low vibration due to
Smooth rolling of the rotors with new ROLLING PROFILE®
Optimized outlet port
